FLAMRO^® Multi Combi Seal

Mixed penetration seal

The Combi Seal is used to preserve fire resistance at openings in lightweight partition walls, rigid walls and floors through which various types of cables and pipes are inserted.

Get a quote Downloads

Fire Resistance Class

max. EI 120 acc. to EN 13501-2

Field of Application

Plasterboard wall
Solid wall
Floor

Certifications

ETA-13/0756
FM Global Approval No. 3044513

Downloads

Datasheets

Application Data Sheet FLARMO® Multi Combi seal EN

Installation manual

Installation Manual FLAMRO® Multi Combi seal

Approval

Approval-ETA-13-0756-FLAMRO-Multikombischott-EN

Special Benefits

Coating may be sprayed, brushed or spread with spatula
No drops, clean working
Easy installation and retrofitting
Also approved for lightweight partition walls with steel and wooden stands
Max. opening dimensions for walls 1400 x 2000 mm
Short coating lengths for installations (200 mm)
Coatable with water based emulsion paint
Mineral fibre plates with external coating only
High flexibility
Area of application Y2 in accordance with EOTA TR 024.
The seals must be protected from rain and UV.
The seal may also be installed in pressurised areas or in a vacuum
Resistant to wind loads according to DIN EN 12211
Air permeability according to DIN EN 1026

Permitted Configuration

Non-combustible pipes made from steel, stainless steel, cast steel ≤ 168.3 mm
CU pipes ≤ 88.9 mm
Plastic pipes (PVC, PE) ≤ 160 mm in conjunction with Variant N II A Fire Protection Collar EI 120 U / U
Sheathed cables up to . 80 mm
Cable bundle up to . 100 mm
Installation pipes ≤ 25 mm
Synthetic rubber insulated pipes Armaflex Protect
Ducts up to 25 mm, rigid | flexible | occupied | unoccupied | combustible | non-combustible | also as bundle
Plastic pipes (PVC, PE) insulated with Arma Protect EI 120 U / C