Intumescent fire protection coating on water-based dispersion for indoor use. Approved product for cable, pipe or combined penetration sealings as well as for joint seals and special components (concrete protection).
Product is furthermore used as protective coating for cables and cable support structures in dry areas to prevent a fire spread caused by an external fire source.
PYRO-SAFE® FLAMMOPLAST KS 1
Coating
Solvent-free and pH-neutral, halogen-free, white, aqueous, insulating dispersion for indoor use
Field of Application
- Coating for penetration sealing systems
- Protective coating for cables and cable systems
- Sealing of fire protection joints
Certification
- ETA-13/0543
Downloads
Safety datasheets
Safety Data Sheet PYRO-SAFE® FLAMMOPLAST KS 1 / KS 1-W / KS 3Declaration of performance
Declaration of performance - PYRO-SAFE® FLAMMOPLAST KS 1Field of Application
Applicability certificate
Tested and approved according to national and international standards as e.g.:
DIN, IEC and FM, other standards on request
Product Features
Solvent-free and non halogen.
Handling
- Material needs to be stirred well.
- The surface has to be dry, dust-free und free of grease.
- The application can take place with a brush, paint roller or an airless spraying machine.
- For spraying method (nozzle orifice > 0,019 inch = 0.48 mm): Mixing with max. 2 % amounts of water.
Technical Data
Color | white |
Density (+ 20%) | 1.20 – 1.37 g/cm³ |
Viscosity (+ 20%) | 8,000 – 12,500 mPas |
Volatile Content | < 140g/l |
Consumption | Dry film thickness 500 µm ≈ Consumption: 1 kg/m² |
Drying Time (at +23°C / 65% ± 3% rel. humidity) | Dust dry: min. 6 hours Re-workable: min. 8 hours Thoroughly dry: min. 4 days |
Processing temperature | ≥ +5°C |