PYRO-SAFE^® BIOFERM A

Acrylic fire protection filler

Fire protection acrylate free of halogen, solvents, isocyanate and silicone. Can be painted over, resistant to ageing and weathering.

Get a quote Downloads

Field of Application

Flexible fire protection sealing of structural joints in indoor and outdoor areas for sealing connections and joints with moderate expansion stress and without constant exposure to moisture.

Certification

abP P-NDS04-667

Downloads

Safety datasheets

Safety Data Sheet PYRO-SAFE® BIOFERM A

Declaration of performance

Declaration of performance - PYRO-SAFE® BIOFERM A

Field of Application

For sealing connections and joints with moderate tensile stress and without constant exposure to moisture, e.g. between concrete, brickwork, plastered surfaces, fi bre cement, plasterboard, bare and anodized aluminum, wood and rigid PVC.

Applicability certificate

Tested and approved according to national and international standards as e.g.:
DIN, EN, other standards on request

Product Features

Halogen-, solvent-, isocyanate- und silicone-free, odor-neutral, compatible with coatings, overpaintable, very long shelflife, ageing- and weatherresistant, good UV-resistance, watersoluble.

Handling

Application temperature: +5 °C to +40 °C
Pretreat with diluted filler for optimal adhesion to surface
Other indications observe mounting instructions.

Consumption

12 linear meter for joint dimensions of 5 x 5 mm can be achieved with one cartridge. For joint dimensions 10 x 10 mm approx.
3 linear meters can be realized with one catridge.

Technical Data

Color	light grey
Density (DIN 53217)	ca. 1.56 ± 0.04 g/cm3
Load stability (DIN EN ISO 7390)	≤ 2 mm
Skinning Time (23°C / 50% rel. humidity)	approx. 10 min
Penetration (DIN 51 579. 5 sec)	approx. 250 ± 30 1/10 mm
Movement	approx. 7,5%
Shore A hardness (DIN 53505, 28d NK)	15 ± 5 units
Mass reduction (ISO 10563)	max. 15%
Temperature load (fully cured)	-25°C up to +80°C