|Colour||Two-coloured: anthracite / red, can be used freely alternately.
Other colours, single-coloured also possible on request
|Nominal thickness||approx. 1.4 mm|
|Surface weight||1,580 – 1,950 g/m²|
|Foaming factor||16.5-fold ≤ fex ≤ 24.0-fold
(tested on 1.4 mm thick samples at 550°C for 30 min with weight support)*
|Inflation pressure||1.50 N/mm² ≤ pex ≤ 2.00 N/mm²
(tested at 300°C; method A)*
|Application temperature||+5 °C to +50 °C, (< +5 °C reduction of flexibility)|
|Application instructions||With standard cutting tools such as scissors or a cutter knife|
|Storage||Dry indoors. Storage temperature < 50 °C.
Rolls must be protected from pressure loads.
|Safety information||Further information can be found in the safety data sheet.|
* The test procedure is deposited at the German Institute for Construction Technology (“Deutsches Institut für Bautechnik”).