PYRO-SAFE® Flammoplast SP-A2
coating for structural steel

Intumescent fire protection coating for structural steel

Field of Application

Applicable intumescent fire protection coating on water-based dispersion for indoor use. Approved product to protect structural steel (columns, beams and truss), tested for i-sections and hollow sections.

Applicability certificate

Tested and approved according to national and international standards as e.g.:
EN, GOST and CSN, other standards on request

Handling

  • The surface has to be free of contaminants and flaking old coatings.
  • Product needs to be stirred well.
  • Application possible with brush, paint roller or airless spraying machine.
  • For spraying method: (nozzle orifice > 0.019 inch = 0.48 mm) or compressed air (nozzle orifice ≥ 3.5 mm).

Fire rating of systems
Up to 2 hours

Ordering information
PE-pails of 12.5 kg and 15 kg

Storage
Protect the product from frost! Cool and dry (+5 °C up to +25 °C).

Safety Instruction
Please refer to our MSDS (safety data sheet).

Technical Data

Color white
Density (+ 20%) 1.30 – 1,.46 g/cm³
Viscosity (+ 20%) 9.500 – 10.000 mPas
Volatile Content < 140g/l
Consumption Consumption / dry film thickness (DFT) depends on:

  • Type of section
  • Hp/A-factor (m-¹)
  • Fire rating
  • Requested standard
Drying Time (at +23°C / 65% ± 3% rel. humidity)
Dust dry: min. 1 hours
Re-workable: min. 6 hours
Thoroughly dry: min. 4 days
Processing temperature
≥ +5°C / <85% humidity

Downloads

Datasheet
Link

Safety Datasheet
Link

Declaration of performance
DEGBHR