PYRO-SAFE® Flammoplast KS 1
coating

Intumescent fire protection coating

Field of Application

Intumescent fire protection coating on water-based dispersion for indoor use. Approved product for cable, pipe or combined penetration sealings as well as for joint seals and special components (concrete protection).
Product is furthermore used as protective coating for cables and cable support structures in dry areas to prevent a fire spread caused by an external fire source.

Applicability certificate

Tested and approved according to national and international standards as e.g.:
DIN, IEC and FM, other standards on request

Product Features

Solvent-free and non halogen.

Handling

  • Material needs to be stirred well.
  • The surface has to be dry, dust-free und free of grease.
  • The application can take place with a brush, paint roller or an airless spraying machine.
  • For spraying method (nozzle orifice > 0,019 inch = 0.48 mm): Mixing with max. 2 % amounts of water.

Fire rating of systems
Up to 2 hours

Ordering information
PE-pails of 12.5 kg and 15 kg.

Storage
Protect the product from frost! Cool and dry (+5 °C up to +25 °C).

Safety Instruction
Please refer to our MSDS (safety data sheet).

Technical Data

Color white
Density (+ 20%) 1.20 – 1.37 g/cm³
Viscosity (+ 20%) 8,000 – 12,500 mPas
Volatile Content < 140g/l
Consumption Dry film thickness 500 µm ≈ Consumption: 1 kg/m²
Drying Time (at +23°C / 65% ± 3% rel. humidity)
Dust dry: min. 6 hours
Re-workable: min. 8 hours
Thoroughly dry: min. 4 days
Processing temperature
≥ +5°C

Downloads

Datasheet
Link

Safety Datasheet
Link

Declaration of performance
DEGBHR