Your Request for

BMS

BMS

Fire stop putty/filler

Your Contact Data

* required
BMS

BMS

Fire stop putty/filler


verwendbarkeitsnachweis Icon

Certification

  • ETA-15/0237
Anwendung im System Icon

Used for system

FLAMRO® Multi Combi Seal FLAMRO® BS-MK Combi seal FLAMRO® KSL Combi seal
https://svt-global.com/applications/flamro-multi-combi-seal
Downloads Icon

Downloads

Technical Data

Odour Weak
Binding agent

Special dispersion – solventless

Pigments / fillers

Non-combustible and flame-retardant pigments and fillers

pH-value Approx. 8
Viscosity

Trowel grade (630-870 dPas at 20 °C – 22 °C, Haake Viscotester VT-02)

Solids

66 % – 76 %

Hazard Class Not hazardous according to Regulation (EC) No. 1272/2008
Equipment cleaning

Clean with water immediately after use

Consumption

Approx. 2.05 kg/m2 for a dry film thickness of 1 mm

Surface

Surfaces must be stable, clean and free of grease and dust; steel and iron parts should be protected against corrosion in case of outdoor applications or in areas where condensed water may be developed

Temperature resistance

The dried through coatings withstand temperatures from –40 °C to +80 °C, there is neither chemical breakdown, discolouration nor a deterioration in its efficacy.

Toxicity Not subject to marking according to Ordinance on Hazardous Substances
Toxicity of the combustion gases Toxicologic harmless – analysis of the combustion gases according to DIN 4102 – A2, 08.09.1986, by RWTH Aachen and by Elektrophysik Aachen GmbH, 11.12.1997.
Limited oxygen index (LOI) 58 % – 64 % , measured on approx. 1.5 mm thick films
Application temperature Do not use at temperatures below 5°C
Thinner Clean water, maximum 5 weight percent
Moisture- sensitivity BMS coatings dried through are not susceptible to moisture and can also be used for outdoor applications.

Get in Touch with Us

BMS

BMS

Fire stop putty/filler