Characteristics | Fire protection compound on the basis of water |
Binding agent | Special dispersion – solvent-free |
Pigments / fillers | Non-combustible and flame-retardant pigments and fillers |
pH-value | Ca. 8 |
Viscosity | Thixotrop (160-220 dPas at 20 °C – 22 °C, Haake Viscotester VT-02) |
Solids | 66% – 76% |
Dilution | Clean water (max. 5 weight. – %) |
Equipment cleaning | Clean with water immediately after use |
Consumption | Approx. 2,05 kg/m2 for a dry film thickness of 1 mm |
Surface | Surfaces must be stable, clean and free of grease and dust; steel and iron parts should be protected against corrosion in case of outdoor applications or in areas where condensed water may be developed. |
Temperature resistance | The applied coating compound withstands temperatures from – 40 °C to + 80 °C, there is neither chemical break- down, discolouration nor a deterioration in its efficacy. |
Back
BMA
Fire stop coating
BMA is an ablation coating mass for wiring and can be applied for either indoor and outdoor use.
Field of Application
- Electrical cables of any material and thickness as well as cable trays made of steel or aluminium profiles
- Permitted for indoor and outdoor use (refineries, industrial facilities etc.)
Certification
- ETA-15/0237