Your Request for

BIOFERM A

BIOFERM A

Sealant

Your Contact Data

* required
Back
BIOFERM A

BIOFERM A

Sealant


Fire protection acrylate free of halogen, solvents, isocyanate and silicone. Can be coated over, resistant to ageing and weathering.

Einsatzbereiche Icon

Field of Application

  • Flexible fire-resistant sealing for structural joints in indoor and outdoor areas – for sealing connections and joints with moderate expansion stress and without constant exposure to moisture.
verwendbarkeitsnachweis Icon

Certification

  • abP P-NDS04-769
Downloads Icon

Downloads

Technical Data

Colour Light grey
Bulk density approx. 1,55 ± 0,05 g/cm³
Stability (DIN EN ISO 7390) ≤ 2 mm
Penetration (DIN 51 579, 5 sec) approx. 210 ± 30 1/10 mm
Shore-A hardness 15 ± 5 units
Mass loss (ISO 10563) max. 15 %
Temperature load (cured)
-25 °C to +80 °C
Skin formation (23 °C / 50 % relative humidity) approx. 10 min.
Motion absorption approx. 7,5 %
Application temperature +5 °C to +40 °C
Application instructions
  • The adhesive surfaces must be dry, load-bearing and free of dust and grease.
  • For optimum adhesion to the surface, pre-treat with diluted sealing
    compound.
Consumption With one cartridge for joint dimensioning of:
5 × 5 mm – approx. 12 linear metres
10 × 10 mm – approx. 3 linear metres
Storage Protect from frost! Store in a cool and dry place (+5 °C to +25 °C).
Can be stored for at least 18 months in sealed original containers.
Safety information Please observe the safety data sheet.
Declaration of performance (DOP) no.
01156011-BIOFERM-A

Get in Touch with Us

BIOFERM A

BIOFERM A

Sealant