FLAMRO® DSB-W

FLAMRO® DSB-W
Intumescent filler

Application Areas

  • Electrical cables
  • Pipings with an outer diameter up to 160 mm
  • Pipings for non-combustible mediums

Application Details

In areas where an infestation by microbes (composting systems etc.) can be expected, FLAMRO DSB-W should only be used with an increased proportion of film preservative. In such cases, please contact the supplier. The product may not be exposed to bad weather conditions such as driving rain, freezing – thaw changes, UV radiation. Can be used in areas with high moisture load.

Shelf-life: In the sealed, original drums, min. one year at room temperature (5 °C – 30 °C) Protect from freezing temperatures and direct sunlight

Packaging: 310 ml cartridges (0.4 kg)

Color
Light grey

Spec. Weight

1.35 – 1.60 g/cm3

Drying time

Completely dry – depending on room temperature, humidity and application thickness: 1 – 3 days

Technical Data

Flash point

No flash point, does not burn

Binding agent Special dispersion – solvent-free
Pigments / fillers

Non-flammable and flame-inhibiting pigments and fillers

pH-value Ca. 8
Viscosity
Putty-like
Toxicity H412 Harmful to aquatic life with no long lasting effects. P273 Avoid release to the environment.
Dilution

Clean water (max 5 weight.- %)

Equipment cleaning

Clean with water immediately after use

Consumption For dry film thickness of 1mm ca. 1.80 kg/m²
Substrate

Substrates must be load-bearing, clean, free of grease and releasing agents. In areas where condensation water develops, steel and iron parts must be protected against corrosion.

Moisture resistance

Can be applied in areas with high moisture.